Helac & HKS interchange table: OEM part number → HN replacement
Type the number from your nameplate. Partial numbers, no-dash formats, IC-Fluid and DL codes all work.
L10 → HN10
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Mount / note | Status | Quotation |
|---|---|---|---|---|---|---|---|
| L10-3.0 | HN10-3 DL-1-3 | 320 Nm | 1,200 | 180 / 360° | Flange | In production | Quotation L10-3.0 on WhatsApp |
| L10-5.5 | HN10-6 DL-1-6 | 600 Nm | 1,900 | 180 / 360° | Flange | In production | Quotation L10-5.5 on WhatsApp |
| L10-9.5 | HN10-10 DL-1-10 | 1,000 Nm | 3,800 | 180 / 360° | Flange | In production | Quotation L10-9.5 on WhatsApp |
| L10-15 | HN10-16 DL-1-16 | 1,600 Nm | 5,700 | 180 / 360° | Flange | In production | Quotation L10-15 on WhatsApp |
| L10-25 | HN10-27 DL-1-27 | 2,700 Nm | 9,400 | 180 / 360° | Flange | In production | Quotation L10-25 on WhatsApp |
L20 → HN20
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Mount / note | Status | Quotation |
|---|---|---|---|---|---|---|---|
| L20-4.5 | HN20-5 DL-2-5 | 500 Nm | 1,300 | 180° | Foot | In production | Quotation L20-4.5 on WhatsApp |
| L20-8.2 | HN20-9 DL-2-9 | 900 Nm | 2,400 | 180° | Foot | In production | Quotation L20-8.2 on WhatsApp |
| L20-15 | HN20-16 DL-2-16 | 1,600 Nm | 4,400 | 180° | Foot | In production | Quotation L20-15 on WhatsApp |
| L20-25 | HN20-27 DL-2-27 | 2,680 Nm | 7,100 | 180° | Foot | In production | Quotation L20-25 on WhatsApp |
| L20-39 | HN20-42 DL-2-42 | 4,200 Nm | 10,500 | 180° | Foot | In production | Quotation L20-39 on WhatsApp |
L30 → HN30
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Mount / note | Status | Quotation |
|---|---|---|---|---|---|---|---|
| L30-17 | HN30-19 DL-3-19 | 1,900 Nm | 4,900 | 180 / 360° | Foot / Flange | In production | Quotation L30-17 on WhatsApp |
| L30-25 | HN30-28 DL-3-28 | 2,800 Nm | 6,800 | 180 / 360° | Foot / Flange | In production | Quotation L30-25 on WhatsApp |
| L30-42 | HN30-47 DL-3-47 | 4,700 Nm | 12,000 | 180 / 360° | Foot / Flange | In production | Quotation L30-42 on WhatsApp |
| L30-65 | HN30-73 DL-3-73 | 7,300 Nm | 18,000 | 180 / 360° | Foot / Flange | In production | Quotation L30-65 on WhatsApp |
| L30-95 | HN30-105 DL-3-105 | 10,500 Nm | 26,000 | 180 / 360° | Foot / Flange | In production | Quotation L30-95 on WhatsApp |
| L30-125 | HN30-140 DL-3-140 | 14,000 Nm | 35,000 | 180 / 360° | Foot / Flange | In production | Quotation L30-125 on WhatsApp |
| L30-165 | HN30-180 DL-3-180 | 18,000 Nm | 46,000 | 180 / 360° | Foot / Flange | In production | Quotation L30-165 on WhatsApp |
| L30-215 | HN30-240 DL-3-240 | 24,000 Nm | 59,000 | 180 / 360° | Foot / Flange | In production | Quotation L30-215 on WhatsApp |
DA-H → HN / custom
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Mount / note | Status | Quotation |
|---|---|---|---|---|---|---|---|
| DA-H 40 | Built to sample HN10 nearest | on request | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 40 on WhatsApp |
| DA-H 63 | Built to sample HN10 nearest | 1,000 Nm | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 63 on WhatsApp |
| DA-H 80 | Built to sample HN20 nearest | 1,600 Nm | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 80 on WhatsApp |
| DA-H 100 | HN20-27 | 2,500 Nm | 5,800 | 90 / 180 / 270 / 360° | Foot / Flange | In production (HN equiv.) | Quotation DA-H 100 on WhatsApp |
| DA-H 125 | HN30-17 | 5,107 Nm | — | 90 / 180 / 270 / 360° | Foot / Flange | In production (HN equiv.) | Quotation DA-H 125 on WhatsApp |
| DA-H 140 | HN30-28 | 7,100 Nm | — | 90 / 180 / 270 / 360° | Foot / Flange | In production (HN equiv.) | Quotation DA-H 140 on WhatsApp |
| DA-H 160 | HN30-47 | 11,300 Nm | — | 90 / 180 / 270 / 360° | Foot / Flange | In production (HN equiv.) | Quotation DA-H 160 on WhatsApp |
| DA-H 180 | HN30-73 | 16,200 Nm | — | 90 / 180 / 270 / 360° | Foot / Flange | In production (HN equiv.) | Quotation DA-H 180 on WhatsApp |
| DA-H 200 | HN30-73 | on request | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 200 on WhatsApp |
| DA-H 225 | HN30-105 | on request | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 225 on WhatsApp |
| DA-H 250 | HN30-140 | on request | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 250 on WhatsApp |
| DA-H 280 | HN30-215 / HN30-430 | 60,800 Nm | — | 90 / 180 / 270 / 360° | Foot / Flange | In production (HN equiv.) | Quotation DA-H 280 on WhatsApp |
| DA-H 320 | Built to sample HN30-430 nearest | on request | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 320 on WhatsApp |
| DA-H 360 | Built to sample | on request | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 360 on WhatsApp |
| DA-H 400 | Built to sample | on request | — | 90 / 180 / 270 / 360° | Foot / Flange | Build to sample | Quotation DA-H 400 on WhatsApp |
| DA-H 450 | Built to sample | 250,000 Nm | — | 90 / 180 / 270 / 360° | Foot / Flange | Custom build | Quotation DA-H 450 on WhatsApp |
T series → HN40
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Mount / note | Status | Quotation |
|---|---|---|---|---|---|---|---|
| T20-25 | HN40-28 DL-4-28 | 2,800 Nm | 6,100 | 200 / 220° | Foot, spline shaft out | In production | Quotation T20-25 on WhatsApp |
| T20-45 | HN40-50 DL-4-50 | 5,000 Nm | 10,600 | 220° | Foot, spline shaft out | In production | Quotation T20-45 on WhatsApp |
| T20-60 | HN40-67 DL-4-67 | 6,700 Nm | 14,300 | 200° | Foot, spline shaft out | In production | Quotation T20-60 on WhatsApp |
| T30-27 | HN40-28 DL-4-28 | 2,800 Nm | 6,100 | 220° | Foot, spline shaft out | In production | Quotation T30-27 on WhatsApp |
Tilt hitch actuators HN50
Weld-base actuators for tilting quick couplers, 1–25 t carriers — the replacement for PowerTilt-type tilt mechanisms. Search "PTA-100" or similar coupler codes to reach this table.
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Status | Quotation |
|---|---|---|---|---|---|---|
| HN50-9 | HN50-9 DL-5-9 | 900 Nm | 2,400 | 180° | Attachment series (1-1.9 t) | Quotation HN50-9 on WhatsApp |
| HN50-19 | HN50-19 DL-5-19 | 1,900 Nm | 3,800 | 180° | Attachment series (2-2.5 t) | Quotation HN50-19 on WhatsApp |
| HN50-28 | HN50-28 DL-5-28 | 2,800 Nm | 5,600 | 180° | Attachment series (2.6-3.9 t) | Quotation HN50-28 on WhatsApp |
| HN50-47 | HN50-47 DL-5-47 | 4,700 Nm | 9,400 | 180° | Attachment series (4-6.5 t) | Quotation HN50-47 on WhatsApp |
| HN50-73 | HN50-73 DL-5-73 | 7,300 Nm | 14,200 | 180° | Attachment series (7-10 t) | Quotation HN50-73 on WhatsApp |
| HN50-105 | HN50-105 DL-5-105 | 10,500 Nm | 21,200 | 134° | Attachment series (10-15 t) | Quotation HN50-105 on WhatsApp |
| HN50-140 | HN50-140 DL-5-140 | 14,000 Nm | 29,300 | 120° | Attachment series (15-20 t) | Quotation HN50-140 on WhatsApp |
| HN50-180 | HN50-180 DL-5-180 | 18,000 Nm | 37,300 | 120° | Attachment series (20-25 t) | Quotation HN50-180 on WhatsApp |
HN40 / HN60 / HN70
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Mount / note | Status | Quotation |
|---|---|---|---|---|---|---|---|
| HN40-28 | HN40-28 DL-4-28 | 2,800 Nm | 6,100 | 200 / 220° | Foot, spline shaft out | Attachment series | Quotation HN40-28 on WhatsApp |
| HN40-50 | HN40-50 DL-4-50 | 5,000 Nm | 10,600 | 220° | Foot, spline shaft out | Attachment series | Quotation HN40-50 on WhatsApp |
| HN40-67 | HN40-67 DL-4-67 | 6,700 Nm | 14,300 | 200° | Foot, spline shaft out | Attachment series | Quotation HN40-67 on WhatsApp |
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Mount / note | Status | Quotation |
|---|---|---|---|---|---|---|---|
| HN60-40 | HN60-40 DL-6-40 | 4,000 Nm | — | 180 / 360° | Flange, high bending moment | Special series (Mb 60,000 Nm) | Quotation HN60-40 on WhatsApp |
| HN60-63 | HN60-63 DL-6-63 | 6,300 Nm | — | 180 / 360° | Flange, high bending moment | Special series (Mb 100,000 Nm) | Quotation HN60-63 on WhatsApp |
| HN60-90 | HN60-90 DL-6-90 | 9,000 Nm | — | 180 / 360° | Flange, high bending moment | Special series (Mb 150,000 Nm) | Quotation HN60-90 on WhatsApp |
| OEM / Series P/N | Replacement | Torque @210 bar | Holding Nm | Angle | Mount / note | Status | Quotation |
|---|---|---|---|---|---|---|---|
| HN70-5 | HN70-5 DL-7-5 | 500 Nm | — | custom° | Flange, valve control | Valve-control series | Quotation HN70-5 on WhatsApp |
| HN70-10 | HN70-10 DL-7-10 | 1,000 Nm | — | custom° | Flange, valve control | Valve-control series | Quotation HN70-10 on WhatsApp |
| HN70-32 | HN70-32 DL-7-32 | 3,200 Nm | — | custom° | Flange, valve control | Valve-control series | Quotation HN70-32 on WhatsApp |
| HN70-54 | HN70-54 DL-7-54 | 5,400 Nm | — | custom° | Flange, valve control | Valve-control series | Quotation HN70-54 on WhatsApp |
| HN70-78 | HN70-78 DL-7-78 | 7,800 Nm | — | custom° | Flange, valve control | Valve-control series | Quotation HN70-78 on WhatsApp |
| HN70-110 | HN70-110 DL-7-110 | 11,000 Nm | — | custom° | Flange, valve control | Valve-control series | Quotation HN70-110 on WhatsApp |
| HN70-150 | HN70-150 DL-7-150 | 15,000 Nm | — | custom° | Flange, valve control | Valve-control series | Quotation HN70-150 on WhatsApp |
| HN70-200 | HN70-200 DL-7-200 | 20,000 Nm | — | custom° | Flange, valve control | Valve-control series | Quotation HN70-200 on WhatsApp |
60 part numbers, last updated . Torque = max nominal drive torque at 210 bar (21 MPa) from manufacturer catalogues; always confirm against your unit's nameplate. Download the full table: interchange-table.csv. "Build to sample" means you send the old unit or its nameplate and we reverse-engineer it (sample 15–20 days door to door).
Terms of use. The interchange table and its CSV download are © 2026 Weihai Baishili Hardware Co., Ltd. All rights reserved. You are welcome to use them to identify replacement parts for your own equipment. Please do not copy, republish or redistribute them, in whole or in part, without our written permission — write to sagar@swingtorque.com. “Helac”, “HKS” and other brand names are trademarks of their respective owners and are used only to describe compatibility.
Using the interchange table
Which HN series replaces Helac L10, L20 and L30?
Helac L10 → HN10 (DL-1), flange mount. L20 → HN20 (DL-2), foot mount. L30 → HN30 (DL-3), foot or flange mount. The HN number is the torque in Nm ÷ 100 — for example L10-9.5 → HN10-10, L20-8.2 → HN20-9 and L30-42 → HN30-47.
Is there an HN equivalent for HKS DA-H actuators?
DA-H sizes whose torque overlaps the HN range are covered by the nearest HN size — for example DA-H 100 → HN20-27, DA-H 160 → HN30-47 and DA-H 180 → HN30-73. The rest are built to sample.
Do you replace Helac T-series spline-shaft actuators?
Yes. Helac T20 and T30 spline-output units map to the HN40 series (DL-4): T20-25 → HN40-28, T20-45 → HN40-50, T20-60 → HN40-67 and T30-27 → HN40-28.
What replaces a PowerTilt-type excavator tilt hitch actuator?
The HN50 weld-base series (DL-5), sized by carrier weight: from HN50-9 (900 Nm, 1–1.9 t carriers) to HN50-180 (18,000 Nm, 20–25 t). Search a coupler code such as PTA-100 to find the matching size.
What do torque and holding torque in the table mean?
Torque is the maximum nominal drive torque at 210 bar (21 MPa) from manufacturer catalogues; holding torque is what the actuator resists with its ports closed. Both scale linearly with pressure — always confirm against your unit’s nameplate.
My part number is not listed. What should I do?
Please send the old unit or its nameplate and we will reverse-engineer it, with a sample in 15–20 days door to door. Moveco ARR/ARP and other helical units are cross-referenced within 24 hours of receiving the nameplate. Send a custom enquiry.
Can I download the interchange table?
Yes — interchange-table.csv has every row on this page: OEM part number, search aliases, HN replacement, alternate DL code, series, torque, holding torque, rotation angle, mounting, pressure, ports and status.